LED Mirror Manufacturer · OEM & ODM · Since 2010
WITMIRROR The makeup mirror brand of Tianci Hongye
Industry Insights

Hollywood Mirror CE Certification for EU Export: Reports to Request from the Factory Before Ordering in 2026

TCMM-Q35-1 LED 化妆镜(大号圆角灯框横款)

Hollywood mirror CE certification for EU export is the basic entry requirement. Tianci Hongye LED makeup mirrors have obtained or comply with CE, RoHS and other certifications, and test reports can be supplied with the shipment. ErP applicability depends on the light source classification, so please verify it model by model before ordering.

TCMM-Q35-1 LED Makeup Mirror (Large Rounded-Frame Landscape Model)
Figure 1 | TCMM-Q35-1 LED Makeup Mirror (Large Rounded-Frame Landscape Model)

Which certifications are required for exporting Hollywood mirrors with CE?

For Tianci Hongye LED makeup mirrors going to the EU, CE and RoHS documents come first; other certifications depend on the destination market.

In addition to the above, products comply with or hold UL, SAA, FCC, EPA and other standards depending on the market. Each certification applies to a different market, and they do not all need to be reviewed together.

VDE and TÜV are third-party testing bodies familiar to European buyers. Please request the relevant reports from us according to your destination market. Buyers sourcing Hollywood mirrors with ETL certification wholesale should look at the ETL report, not CE.

Our factory is certified to the ISO 9001 quality management system. Equipment includes SMT high-speed placement, reflow soldering, fully automatic impact aging testing and integrating sphere optical testing.

TCMM-Q3 LED Hollywood Makeup Mirror (10-Bulb Model)
Figure 2 | TCMM-Q3 LED Hollywood Makeup Mirror (10-Bulb Model)

Which countries do you export to?

Tianci Hongye LED makeup mirrors are sold in more than 180 countries and regions, mainly serving brand owners, importers, wholesalers, cross-border e-commerce sellers and retail channels.

Different markets require different documents. When the same LED Hollywood makeup mirror ships to multiple markets, list the certificates and reports required for each destination country.

Brand owners exporting Hollywood mirrors should confirm that reports have been issued for a new model before listing it, and should not assume reports from an older model carry over.

Do Hollywood makeup mirrors exported to the EU need CE, RoHS and ErP?

LED makeup mirrors exported to the EU must have CE and RoHS documents. ErP applicability depends on the light source classification and is not determined by a single certificate.

CE is a manufacturer’s declaration that the product complies with EU directives, not a single certificate. LED makeup mirrors typically fall under the Low Voltage Directive 2014/35/EU (applicable to 50–1000V AC and 75–1500V DC) and the EMC Directive 2014/30/EU (covering electromagnetic emissions and immunity). The CE mark must be affixed clearly and indelibly to the product or rating plate before it is placed on the market.

For Hollywood mirror CE compliance, start with the power supply. The TCMM-Q35-1 LED Makeup Mirror (Large Rounded-Frame Landscape Model) operates at DC12V, with an adapter rated at 100-240V input and DC12V 2A output. The TCMM-Q35 LED Makeup Mirror (Rounded-Frame Landscape Model) has a 5V 1A input. The adapter’s AC input falls within the scope of the Low Voltage Directive, so the adapter needs its own compliance documents.

RoHS restricts ten substances in homogeneous materials: lead, mercury, hexavalent chromium, PBB, PBDE, DEHP, BBP, DBP and DIBP each at no more than 0.1%, and cadmium at no more than 0.01%. A homogeneous material is a single material that cannot be further separated by mechanical means. For bulb models, such as the TCMM-Q2 LED Hollywood Makeup Mirror (6-Bulb Model) and the TCMM-Q3 LED Hollywood Makeup Mirror (10-Bulb Model), the bulbs, sockets, housing and wiring must all be included. The four phthalates, including DEHP, have applied to general electrical and electronic equipment since July 22, 2019.

ErP is the Ecodesign Directive, covering energy efficiency and product design requirements; it does not issue a “certificate.” Models with replaceable bulbs and models with fixed light sources may be classified differently and may have different requirements. For whether an energy label or EPREL database registration is required, ask the factory to provide the classification basis for each specific model.

Item Scope Documents to review before ordering
CE Electrical safety (LVD) and electromagnetic compatibility (EMC) Declaration of Conformity, test reports, CE mark on the rating plate
RoHS Limits for ten hazardous substances Technical documentation prepared per EN IEC 63000, test reports
ErP Energy efficiency and ecodesign requirements Classification statement issued by the factory per model
How to decide No order without both CE and RoHS; ErP follows the classification statement Model and adapter model on the reports must match the order

Data sources: EU Directives 2014/35/EU and 2014/30/EU, and (EU) 2015/863; TCMM-Q35 and TCMM-Q35-1 product specifications.

Makeup Mirror Certification for EU Export: Five-Step Report Check

Request documents from the factory using the five steps below, and check off each item before ordering:

  • Request the CE Declaration of Conformity (the manufacturer’s document stating which directives the product complies with), and check the model, manufacturer name and address.
  • Request test reports for the Low Voltage and EMC Directives, with a separate set for the power adapter.
  • Request the RoHS test report, and confirm it covers the four phthalates DEHP, BBP, DBP and DIBP, with the tested parts including bulbs, housing and wiring.
  • Request the ErP classification statement, specifying which light source category applies.
  • Request photos of the rating plate and outer carton, and check the CE mark position and the input/output parameters.

A common misconception is that “a product with a CE mark can be exported.” The mark is only the outcome. At customs clearance or platform spot checks, what is reviewed is the Declaration of Conformity and technical documentation for the specific model, and if the model does not match, it is as if there were none. If CE documentation is incomplete, goods may be held at customs clearance or platform spot checks, and will be delayed at port while documents are supplemented.

TCMM-Q1 LED Hollywood Makeup Mirror (Square Light Strip Model)
Figure 4 | TCMM-Q1 LED Hollywood Makeup Mirror (Square Light Strip Model)

Where are Hollywood mirror CE factories mainly located?

The Tianci Hongye Hollywood mirror factory is located in the Jiangmen High-tech Zone, Guangdong.

Location does not equal compliance. Check that the names and addresses match across three places: the report header, the Declaration of Conformity, and the factory on your order. When a trading company or an OEM Hollywood mirror manufacturer takes the order, the manufacturer named on the report may be a different factory. During a factory audit, compare all three, and ask the supplier to explain any mismatch.

Our operating entity, Jiangmen Tianci Hongye Technology Co., Ltd., was established on December 24, 2015. It evolved from a lighting company founded in Shenzhen in 2010 and relocated to the Jiangmen High-tech Zone at the end of 2015. The production base covers approximately 8,500㎡, with more than 200 employees and a combined annual capacity of over 5 million sets.

Overview of the factory at dawn / dusk: at dusk, viewed from a slightly elevated point outside the factory…
Figure 5 | Overview of the factory at dawn / dusk: at dusk, viewed from a slightly elevated point outside the factory…

In the following cases, we do not recommend ordering on CE and RoHS documents alone: LED makeup mirrors with a modified power supply or light board, or those sold outside the EU.

First, custom modifications. If the adapter, light board or plastic parts have been changed, the original report corresponds to the pre-change structure, and you must assess whether retesting is needed. A CE report for a tabletop makeup mirror that lists a different model cannot substitute for the current model.

Second, markets outside the EU. North America requires ETL or UL, and CE cannot substitute for them.

Before ordering, confirm three things: the CE Declaration of Conformity and test reports for the ordered model, whether the RoHS report covers the bulbs, housing and adapter, and the ErP classification statement. We recommend obtaining these three Hollywood mirror CE documents and the rating plate samples first, and then deciding whether to proceed with sampling.

TCMM-Q35 LED Makeup Mirror (Rounded-Frame Landscape Model)
Figure 6 | TCMM-Q35 LED Makeup Mirror (Rounded-Frame Landscape Model)

WITMIRROR

A brand of Jiangmen Tianci Hongye Technology Co., Ltd.
Website: https://www.witmirror.com

About WITMIRROR Team

Written by the WITMIRROR team, who work with importers, retailers and brand owners on LED mirror sourcing and OEM & ODM projects at our factory in Jiangmen, China.

Looking for a reliable LED mirror manufacturer?

Tell us your target market, quantity and design ideas. Our team replies within 24 hours with suggestions and a quotation.

WhatsApp

Insights

Keep Reading

OEM & ODM

Start Your LED Mirror Project

Tell us your market, sizes and quantity — our team replies within 24 hours with suggestions and a quotation.

WhatsApp